INDUSTRIAL GRADE NONVOLATILE MICRO-BIOCIDE
BIOCIDE-BT is a unique, non-volatile oxidizing microbiocide that effectively controls microbiological growth in recirculating cooling water and other water-utilizing systems. BIOCIDE-BT reduces microbial activity by up to 99.9 percent, providing a truly clean system. By virtually eliminating biological activity, the biocide stops biofilm from forming and thus adversely impacting system performance.
BIOCIDE-BT reacts with reductive compounds within the structure of microorganisms and induces a destructive effect on microorganism DNA, hence preventing their energy production ability. Loss of energy production terminates microbial production and inactivates the maximum number of microbial DNA, leaving the system clean and safer.
BIOCIDE-BT dosage is calculated on the basis of raw water quality, location of the system, weather & climate, and other environmental aspects. Physical condition is also kept in account in order to calculate effective dosage for complete dispersion of pre-deposited organic films.
BIOCIDE-BT is an anti-microbial chemical, hence fed in shock doses to effectively eliminate the maximum number of developed or developing microbes. This chemical is most importantly advised to be dosed after sunset in a suggested amount to attack microbial colonies in the cellular respiration process (opposite of photosynthesis).
Keep in a well-ventilated place. Do not store this material near food, feed, or drinking water. Containers may be hazardous when empty. Since emptied containers retain product residue, follow all MSDS and label warnings even after the container is emptied. Use all protection gear and consult MSDS for other safety information.
BIOCIDE-BT comes in containers conforming to Dosage-Oriented Packaging Specifications, in the following sizes:
Section 0: Physical Properties
Appearance and Color: Yellow liquid
Odor: Slight odour
Solubility in Water: Completely miscibile
Specific Gravity: 1.02
pH: 11-12
% volatile by volume @ 21C (70F): NDA
Boiling Point: NDA
Melting Point: NDA
Vapor Density (Air=1): NDA
Vapor Pressure (mm Hg): NDA
Evaporation Rate (Bu. Acetate 1): <0.1
MATERIAL SAFETY DATA SHEET
According to Regulation (EC) No 1907/2006, Annex II
Chemical Name: Biocide-BT micro-biocide
Product Code: AMC-814-3C
Composition Identity: Methyl isothiazolinone, hypochlorite, Hydroxide
CAS Number: Not applicable to blend
Chemical Formula: Blend
Identified Usage: Biocidal product, industrial or commercial usage
Supplier: Maxon Chemical Products (Pvt.) Ltd.
121/A Gule Daman, College Road, Lahore, Pakistan. 54000
Emergency Contact: Maxon Head Office (PK) – +92(42)35155441/2
Technical Principal: Maxon UK
Hazard Overview: Hazardous under the criteria of the Federal OSHA Hazard Communication Standard 29CFR 1910.1200.
Signs and Symptoms of Acute Overexposure:
Signs and Symptoms of Chronic Overexposure:
Medical Conditions Generally Aggravated by Exposure:
Asthma, Heart disease, Respiratory disorder
Inhalation: Remove patient to fresh air. Get prompt medical attention.
Ingestion: Call poison center. Give patient sips of water if able. Do not induce vomiting unless guided by a doctor.
Skin Contact: Remove contaminated clothing and footwear. Wash and rinse skin with soap and water. Call poison control for treatment.
Eye Contact: Immediately flush eyes with water for 15 minutes. Get medical attention immediately.
Note to Physician: None
Stability: Product is stable under normal conditions. May also be reactive in some circumstances.
Hazardous Decomposition Products: Produces oxygen from contact with copper, may develop chlorine if mixed with acids.
Incompatibility: Oxidizing agents, Acids, Nitrogen-containing organics, Metals, Iron, Copper, Nickel, Cobalt & Organic materials
Hazardous Polymerization: Has not been reported
Conditions to Avoid: Incompatible chemicals
Odor Threshold: Approximately 0.9 mg/m3 (0.3 ppm) pungent
Irritation Threshold: No data available
Immediately Dangerous to Life or Health: Not established for the product.
Animal Toxicology:
Restrict access to the affected area. Use personal protective equipment. Use NIOSH-approved respiratory protection. Keep people away from and upwind of spill/leak. Avoid release to sewage.